PCFACE-PCI32: PC EXTENSION INTERFACE PROJECTOR


By LEAPER ELECTRONICS
SKU : 0
Extend the design capabilities of PCFACE-PC132 to develop PCI interface protectors suitable for the development and testing of industrial control cards, supporting PLX903X and 905X series control chips. Protects all power and signals of PCI BUS. The cable length is 45cm. It can expand and extend two expansion slots. It is suitable for educational institutions to import teaching experiments. Students can fully verify the PCI interface industrial control card designed by CPLD or FPGA through PCFAC
AED 2350.00


Description

feature of product
  • The PCI interface slot in the host computer extends beyond the host and expands into two PCI-slots, which can be up to 60cm.
  • Provides a convenient, secure hardware environment for designing PCI product designs.
  • It is not necessary to turn off the power of the computer host. Simply turn off the power of the protector and hot-swap the test card and test card on the PCI slot.
  • With external circuits use good protection against overload or short circuit of the power supply.
  • Four sets of power indicator light, abnormal condition can be found immediately, and the power source's fault can be easily identified and eliminated.
  • ASIC design, stability, and easy maintenance.
  • A 3.3V or 5V PCI interface card can be used.
  • All interface protectors have a protection design function to prevent computer motherboards or interface cards from being damaged.
  • All signal lines and power supplies are isolated.
  • Really extends the system signal. All signals in the expansion slot can be measured and used.
  • The production process can be easily introduced by operating the software to control the power switch.
Product specifications
  • Size: 18cm x 2.7cm x 16cm
  • Weight: 500g
  • Operating height: 5000m
  • Operating Humidity: 90% (non-condensing)
  • Operating temperature: +5°C ~ +45°C
Other specifications
  • Hardware Specification: Compliance with the PCI 2.2 Hardware Specification
  • Compatibility test:
    • PLX903 X Series PCI Interface Industrial Control Card
    • PLX905 X Series PCI Interface Industrial Control Card
    • CPLD, FPGA Series PCI Interface Card
  • External load specifications: 
    • +3.3V/1.5Amp ± 5%
    • +5V/5Amp ± 5%
    • +12V/600mA ± 5%
    • -12V/100mA ± 5%
  • Consistent Interface Card: Compatible with 33MHz/32bit PCI Interface Cards
Applications
  • PCI industrial control card experiment, design, production, test use.
  • The academic unit PCI interface uses a variety of teaching, experiment, design, and verification courses.
 
Standard equipment
  • Host x 1
  • Fixed iron sheet x 1
  • Cable x 2 (power line x 1, signal line x 1)
  • PCI-Power card x 1
  • PCI signal card x 1
  • Compact Disc (with installer) x 1
  • M3 x 4 screws x 2

Related Products