P-027: Magic light cup module

AED 12.00 Without VAT


The LED will be switched on and off by vibration. The signal will be send to the output if the LED is on. You need pre-resistors for some voltages.


Technical data 

The LED will be switched on and off by vibration. The signal will be send to the output if the LED is on. You need pre-resistors for some voltages.


Pre-resistor:

Rf (3,3V) [Red]= 120Ω

[used with ARM CPU-Core based microcontroller like Raspberry-Pi]


Rf (5V) [Red] = 220Ω 

[used with Atmel Atmega based microcontroller like Arduino]