GLP-1A Logic Pulser

AED 130.00 Without VAT



  • Features
    •  
      Combining a Logic Probe and Pulser Combined into One
    •  
      Probe for Troubleshooting Digital Circuits
    •  
      Operating Voltage: 4VDC ~ 18VDC
    •  
      Maximum Input Signal Frequency: 50MHz
    •  
      TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V
    •  
      CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5%
    •  
      Minimum Detectable Pulse Width: 10nsec
    •  
      Pulser: Sync input impedance 120kΩ
    •  
      Pulse Repetition Rate: Switchable 0.5/400Hz
    •  
      Pulse width: 10μsec
    •  
      Dimensions & Weight: 18(W)x210(H)x18(D)mm, Approx. 50g
LOGIC PROBE
Maximum Input Frequency 50MHz
Input Impedance 120kΩ
Operating Voltage 4V DC (minimum)
18V DC (maximum)
TTL Logic "1" (HI LED) >3.0V +0.25V
  Logic "0" (LO LED) <0.75V +0.25V
CMOS Logic "1" (HI LED) >60%Vcc +5%
  Logic "0" (LO LED) <15%Vcc +5%, <40% +5% (For 7 ~ 18Vcc)
LOGIC PULSER
Sync Input Impedance 1MΩ
Pulse Rate 0.5/400pps
Pulse Width 10μS
Output Current 100mA sink/source
Square Wave Output 5mA sink/source
Operation Voltage 5 ~ 15V DC
Output Protection 20V DC (maximum 30 sec)
Input Protection 120V DC (maximum 30 sec)
Measurement Point Protection 35V DC (maximum 30 sec)
DIMENSIONS & WEIGHT
  18(W) x 210(H) x 18(L) mm
Approx. 50 g